Engraving, machining parts on CNC milling machine, either manual or automatic programming programming problem encountered is the first light treatment process. CNC engraving and milling machine parts program is usually better than ordinary machine tool parts process planning is much more complex. Technical rules of ordinary engraving and milling machine is really just a process card, tools, cutting the amount of use of the machine, moving path, step by step often operate within the Master of their own choice. On CNC milling machine tools.
These contents have become a fixed purchase program. That battle is the operator with flexibility Dongqu, but also pre-selected and arranged, written in the program, the part program to include motion machine, tool selection, fixed knife route determination, cutting the amount of choice and so on. This requires that the programmer has a high quality, to be familiar with the machine performance, features, specifications and cutting tool systems, Gaudin program can not go wrong, otherwise it will have an accident.
CNC engraving and milling machine is mainly used a PC104 system technology, which is a defined specifically for embedded control and industrial control bus their signal definitions and PC / AT are basically the same, but the electrical and mechanical specifications are completely different, is an optimization The small, embedded control system stack type structure, with ordinary PC, ISA bus control system compared to have the following characteristics: